A Thermostatic Mixing Valve (TMV) mixes cold water and hot water and produces tempered water at a constant pre-set temperature enabling temperature control of faucets that require a single tempered supply line (typically sensor faucets without mixing valves). Delivering this tempered water to the end user helps eliminate the chance of scalding. Handwashing sinks should generally be set to at least 100°F, and not greater than 108°F. It is typically paired with a point of source (ASSE 1070) TMV (located near the hot water heater /distribution source) which pre-mixes the water temperature down to approx. 122ºF before entering the plumbing distribution network.
The Zurn Model 38-ZW1070XLCOMP Aqua-Gard® 3/8" Thermostatic Mixing Valve is engineered with a rapid response time and precise temperature control (adjustable from 95°F to 115°F (35°C to 46°C)) and is intended to be installed at the point of use (under sinks and near faucets) to assist in the prevention of scalding. This product meets the stringent standards of ASSE 1070 listed for fixtures, sinks, lavatories or bathtubs. Unit is also NSF 61 lead-free certified.
1/2" Copper Sweat Connections
Note: This product is the TMV ONLY, supply line(s) are not included.
- 10 GPM at a 45 psi pressure loss (minimum flow rate of 0.25 GPM)
- Maximum Working Pressure: 125 psi
- Valve Body: Low Lead Cast Bronze ASTM B584 w/Chrome Plating ASTM B456 Service Condition #2
- Internal Brass: Low Lead Brass ASTM B927 UNS C27450
- Checks & Guide Tube: NORYL™ GFN2
- Adjustable Output Range: 95-115°F max (35-46°C)
Certifications:
Measurement Diagram:
Architectural Specification:
Warnings:
- Specifications for 12-ZW1070XLC Mixing Valve
- Installation and Maintenance Instructions for Zurn 12-ZW1070XLC Thermostatic Mixing Valve