• Home
  • ASI EZ FILL™ 10-0390-1AC Deck Mount, Top-Fill, Automatic, Multi-Feed Liquid Soap Dispenser Head, AC Adapter - Polished Chrome

ASI EZ FILL™ 10-0390-1AC Deck Mount, Top-Fill, Automatic, Multi-Feed Liquid Soap Dispenser Head, AC Adapter - Polished Chrome

(0) No Reviews yet
$225.48
SKU: 10-0390-1AC

IN STOCK

22 available for immediate shipment


Distinguishing Features:  Top-Fill (Shared Reservoir) • Polished ChromeAC AdapterLiquid Soap

Countertop (deck mount) automatic (hands-free) liquid soap dispenser. Heavy duty brass body construction with polished chrome exterior.

This dispenser feeds from a central reservoir (10-0390, purchased separately) which allows refilling from above the counter and supplies up to 5 additional units. Shared reservoir capacity is 203 fl. oz. (6 liters). 110-120V AC adapter (included) provides power. Above counter LED indicates function and battery condition.

Optional remote control (10-0390-R, purchased separately) can start an auto-priming function when soap is refilled, and can adjust the amount of soap dispensed.


Soap Requirements: Proper usage of this dispenser requires, that only soap in the following range for viscosity and pH may be used.

>Viscosity Range (mPa·s or cP): 100 – 3800
>pH Range: 5 ~ 9

Additional information and specific soap brand recommendations can be found in this ASI EZ Fill Tested Soaps Document

  • Easy Refill: Using a single soap reservoir (purchased separately), this top-fill system allows refill of up to 6 soap dispensers with 1 pour—for easy ongoing maintenance.
  • A/C Version Plugs into Electrical Outlet
  • Universal Remote: (Purchased separately) controls all dispensers with one remote, allowing flexibility in settings with a choice of 4 presets.
  • Uses bulk fill soap, saving money, and avoiding waste of single use cartridges and pouches.


Brand: ASI EZ Fill   
Manufacturer Part No.: 10-0390-1AC   
Operation: Automatic (Hands-Free) Sensor Activated   
Construction: Heavy Duty Brass, Polished Chrome Finish   
Soap Type | Requirements: Clear Liquid, no abrasives
Viscosity: 100-3800cP (mPa*s)
PH: 5.5-8.5   
Capacity: Shared multifeed reservoir (up to 6 Liters)   
Dispense Amount: 0.007 oz (0.2 ml) to 0.08 oz (2.3 ml) in four (4) steps   
Rough-in: 1-1/8” Dia (Ø28)Recommended hole size   
Above Counter Dimensions: Dispenser Head: 4-3/32" Tall x 1-1/2" Wide x 3-5/8" Depth (front to back)   
ADA: Yes   
Power: 110-120V, 60Hz (AC Adapter, included)   
Shipping Dimensions: 15" Length x 15" Width x 6" Height   
Shipping Weight: 5.2 lbs.   
UPC / GTIN: Not published   
Country of Manufacture: Taiwan   
Warranty: 2 Year Manufacturer's Limited   

Architectural Specifications:

   

EZ FILL™ Vanity Mounted Automatic Soap Dispensing System Soap Dispenser shall dispense liquid soap with pH in range 7± 1.5 and viscosity in range 100–3800 cP (mPa•s) and shall dispense in stream cycles with volumes of approximately 0.007 oz (0,2 ml) to 0.08 oz (2,3 ml) in four (4) steps programmable by owner with remote control programming unit (optional, Model № 0390-R; supplied one (1) per six (6) pack) with factory preset at approximately 0.03 oz (0,8 ml). Operation is initiated by hands-free sensor controlled by microprocessor digital circuitry and peristaltic pump is powered by six (6) ‘D’-size 1.5V batteries (supplied by others) in a screw-locked IP67 rated compartment (provided) located under counter or an AC Adapter (also IP67 rated, provided, select model) plugged into GFCI outlet (by others). Unit shall have chrome plated spout and sensor housing with a highly polished finish (or Matte Black when code –41 is specified) over all exposed surfaces. Unit shall have LED in sensor to indicate function and battery condition (when Battery Box, 0390-BP {provided}, is used). A self -adhesive label shall be supplied for use at owner’s option to indicate dispenser function. Unit shall mount on vanity deck up to 2" [51] thick through 1" Dia [Ø25] hole min to 1-1/4" Dia [Ø32] max and(more...)



Ratings & Reviews

No reviews available

Be the first to Write a Review