Resetting the Filter Status and Bottle Counter on Legacy ezH2O Bottle Filling Stations

Tools Needed:

  • Cut-resistant gloves
  • Safety Glasses
  • Multi-bit Screwdriver

Steps:

  1. Put on safety glasses and cut-resistant gloves as metal edges can be rough.
  2. Remove the top cover of the bottle filling station by unscrewing the two Torx screws.
  3. At the top right, you will find the program button (black piece sticking out).
  4. Depress the button for approximately two seconds until the display below changes, then release. Your number of plastic bottles will change from your current value to FLTR =0.
  5. The display will scroll through two messages (RST FLTR and SETTINGS).
  6. When the display is on RST FLTR depress the button again.
  7. When the display changes to show FLT =0000 depress the button again.
  8. The display will show FLTR =0.
  9. The green LED filter status light will be illuminated to show the filter monitor has been reset.
  10. Replace the top cover.
  11. DONE!

For more information on this product or any of the topics mentioned, please feel free to call us at (704) 937-2673, or email info@berls.com and we will be happy to assist you!

<< Back to Video Library

!