• Home
  • Bobrick B-5806x42 Satin Stainless Steel, Straight, 42" Grab Bar

Bobrick B-5806x42 Satin Stainless Steel, Straight, 42" Grab Bar

(0) No Reviews yet
$58.87
SKU: B-5806x42

IN STOCK

5 available for immediate shipment

Safety Warning: Grab bars are no stronger than the anchors and walls to which they are attached and, therefore, must be firmly secured in order to support the loads for which they are intended.

1-1/4″ (32mm) diameter tubing. Rated length of 42". Satin-Finish, slip-resistant surface, stainless steel grab bar for bath/shower/toilet compartment. Snap Flange.

  • 18-8, Type-304, 18-gauge (1.2mm) stainless steel tubing with a satin-finish.
  • Bobrick grab bars that provide 1-1/2" (38mm) clearance from wall can support loads in excess of 900 pounds.


Measurement Diagram:


Type: Straight Grab Bar   
Primary Material: Stainless Steel   
Mount Type: Concealed (Snap Flange)   
Outside Diameter: 1-1/4"   
Rated Width: Not Applicable   
Rated Length: 42"   
Grip Type: Smooth   
Finish / Color: Satin   
Load Capacity: Up to 600 lbs.   
Bariatric: Yes   
Antimicrobial: No   
Overall Dimensions: 45-1/4" Wide x 3-1/4" Tall x 2-3/4" Deep   
Shipping Dimensions: 46" Length x 4" Width x 4" Height   
Shipping Weight: 3.4 lbs.   
UPC / GTIN: 716954003003   
Manufacturer Model No.: B-5806x42   
Country of Manufacture: USA   
Warranty: 1 Yr. Manufacturer's Limited   

Architectural Specifications:

Grab bar shall be Type-304 stainless steel with a satin-finish, slip-resistant surface. Grab bar shall have 18-gauge (1.2mm) wall thickness and 1-1/4" (32mm) outside diameter. Clearance between the grab bar and wall shall be 1-1/2" (38mm). Concealed mounting flanges shall be 11-gauge (3.2 mm) thick stainless steel plate, 2" x 3‑1/8" (50 x 80mm), and equipped with at least two screw holes for attachment to wall. Flange covers shall be 22-gauge (0.8mm) stainless steel, 3-1/4" (85mm) diameter, and shall snap over mounting flanges to conceal mounting screws and/or WingIt fasteners. Ends of grab bar shall pass through concealed mounting flanges and be heliarc welded to form one structural unit. Grab bar shall comply with accessible design (including ADAAG in the U.S.A.) for structural strength.



Ratings & Reviews

No reviews available

Be the first to Write a Review