Theft Resistant Spindle is fabricated of hi-impact resistant ABS plastic. Accommodates a standard spring-tension plastic roller (ASI Model No R-003, supplied separately) to provide increased vandal resistance. Unit shall fit into all standard holders that receive R-003 and shall hold standard roll tissue with 1-3/8" (35mm) ID core.
INSTALLATION
Insert smaller dia. end (inside telescope) spring loaded roller from dispenser inside screw cap. Screw cap onto threaded body to contain larger (outside telescope) dia. end until R-009 length is 1/16" (1.6mm) less than spacing between dispenser posts (supplied separately). Load R-009 with toilet paper and insert into dispenser posts.
OPERATION
Paper core must be ripped off to remove R-009 after roll is exhausted. Grasp inside roller through opposing windows and retract pivot end from holder socket.
INSTALLATION
Insert smaller dia. end (inside telescope) spring loaded roller from dispenser inside screw cap. Screw cap onto threaded body to contain larger (outside telescope) dia. end until R-009 length is 1/16" (1.6mm) less than spacing between dispenser posts (supplied separately). Load R-009 with toilet paper and insert into dispenser posts.
OPERATION
Paper core must be ripped off to remove R-009 after roll is exhausted. Grasp inside roller through opposing windows and retract pivot end from holder socket.
