ASI 10-7311-20B Heavy duty unit with 3/4" and 3/8" diameter type 304 stainless steel tubing. Bright finish only. Available 20" (510 mm) and 24" (610 mm).
Overall height: 6 1/2" (165 mm); projects 8" (200 mm).
- Surface Mounted Towel Shelf with Drying Rod shall be fabricated of stainless steel alloy 18-8, type 304
- Wall mounting plates formed for strength with dimpled mounting holes
- Cross tubes 3/8" diameter (10mm) and held in receiver holes in continuous 3/4" diameter (19mm) formed mounting frame mechanically retained in wall plates
- Drying rod below shelf is 3/4" diameter (19mm) formed tube mechanically retained in wall plates
Architectural Specification:
Surface Mounted Towel Shelf with Drying Rod shall be fabricated of stainless steel alloy 18-8, type 304. Wall mounting plates shall be formed for strength with dimpled mounting holes. Cross tubes shall be 3/8" diameter (Ø10mm) and shall be held in receiver holes in continuous 3/4" diameter (Ø19mm) formed mounting frame mechanically retained in wall plates. Drying rod below shelf shall be 3/4" diameter (Ø19mm) formed tube mechanically retained in wall plates. Surface finish of entire unit shall be bright. Length shall be as chosen from schedule and indicated by code suffix.
