Fabricated of type 304 stainless steel alloy 18-8. Back plate is 14 gauge. Clothes hooks will be solid bar 3/8″ diameter (Ø10) of one-piece construction with 1″ diameter (Ø25) swivel trip-ball. Safety hooks snap down when load exceeds 35 lb (16 kg) limit. Trip-ball socket housing prevents hooks from being set in vertical-up position.
The unit is provided with six (6) clear mounting holes that shall accept 1/4″-20 x 2″ long (M6 x 51) stainless steel pin-Torx® button head machine screws (supplied).
The unit is provided with six (6) clear mounting holes that shall accept 1/4″-20 x 2″ long (M6 x 51) stainless steel pin-Torx® button head machine screws (supplied).
Architectural Specification:
Security Safety Towel/Clothes Hooks Strip for surface mounting shall be fabricated of type 304 stainless steel alloy 18-8. Back plate shall be 14 gauge. Clothes hooks shall be solid bar 3/8" diameter (Ø10) of one-piece construction with 1" diameter (Ø25) swivel trip-ball. Safety hooks shall snap down when load exceeds 35 lb (16 kg) limit. Trip-ball socket housing shall prevent hooks from being set in vertical-up position. All exposed surfaces shall have No 4 satin finish. The unit is provided with six (6) clear mounting holes that shall accept 1/4"-20 x 2" long (M6 x 51) stainless steel pin-Torx® button head machine screws (supplied).
