ASI 10-110 Fabricated of 16 gauge type 304 stainless steel, satin finish exterior, glass blasted satin finish interior. 4-1/2" (114 mm) interior depth accommodates one standard toilet tissue roll. Hidden contraband causes roll to project from holder allowing detection. Two “T" nuts welded on back for rear mounting.
Architectural Specification:
Recessed Toilet Paper Holder with round bezel for chase mounting shall hold one (1) standard toilet paper roll and shall be 14 gage type 304 stainless steel alloy 18-8. Beveled trim shall have satin finish. Two (2) anchor 1/4-20 T-nuts are welded to holder back. Back mounting plate shall be 11 gage die-formed galvanized steel. Hardware mounting kit (supplied) shall include two (2) threaded rods 1/4-20 x 8" [204] long with four (4) each washers and nuts, back mounting plate and two (2) bolts 1/4-20 x 3/4" [19] long to hold back mounting plate in place. Orientation of threaded rods and bolts shall accommodate shallow or deep wall installation.
