ASI (10-6467-9) Multi/C-Fold Paper Towel Dispenser & Waste Rec., Surface Mt, 4.2 Gal. (600C/800M)
Dispenses 600 C-fold or 800 multi-fold paper towels. 4.2 gal. (16 L) stainless steel waste receptacle. Door held closed with two (2) tumbler locks. Waste receptacle has a rolled edge finger hole for easy servicing.
Surface mounted with stainless steel collar.
Paper towels are manually withdrawn through dispensing slot. Unit will continue to feed properly when reloaded with a partial load in place. Refill dispenser by unlocking door and replacing towels for an empty or partially empty unit. Locking full-face door over compartments prevents unauthorized access or removal.
|Cover Material:||18 Gauge Type 304 Stainless Steel Alloy 18-8|
|Mount:||Wall / Surface|
|Capacity:||600 C-Fold | 800 Multifold|
|Waste Bin Capacity:||4.5 Gal.|
|Locks:||Yes, two (keyed alike)|
|Overall Dimensions:||13" Wide x 55" Tall x 4-1/2" Deep|
|Net Weight:||33.5 lbs.|
|Shipping DImensions:||57" Length x 15" Width x 6" Height|
|Shipping Weight:||36.5 lbs.|
|Comments:||Buy American Act Compliant|
Surface Mounted Towel Dispenser and Waste Receptacle shall hold and dispense 800 standard multi-fold or 600 standard C-fold paper towels, and shall have a waste capacity of 4.24 gal (16L). Cabinet, door, skirt, dispenser and waste receptacle shall be fabricated from alloy 18-8 stainless steel, type 304. Full face door shall be 18 gage formed from one piece with no miters, welding or open seams on face with a 1/2" [13mm] return to collar and shall be attached to cabinet at side with a full length 3/16" Dia [Ø4,8] stainless steel multi-staked piano hinge and be held closed with two (2) tumbler locks keyed like other ASI Washroom Equipment. Cabinet shall be 20 gage and skirt shall be 22 gage. Towel dispensing slot shall have a fully hemmed-in rolled edge for snag-free dispensing and user safety. Dispensing mechanism shall include an adapter that permits the use of multi-fold and C-fold paper towels. Waste receptacle shall have a rolled edge finger hole for easy servicing and removal. Structural assembly of all components shall be of welded construction. All exposed surfaces shall be satin (or Powder Coated (PC) Matte Black finish if suffix -41 is added to Model №) finish protected by a PVC film easily removable after installation. Unit shall be supplied with SM collar (skirt) to convert to surface mounting.