• Home
  • Bobrick B-6806x48 Stainless Steel Grab Bar, 1-1/2" OD, 48" L, Concealed Mount (Snap Flange)

Bobrick B-6806x48 Stainless Steel Grab Bar, 1-1/2" OD, 48" L, Concealed Mount (Snap Flange)

(0) No Reviews yet
$79.50
SKU: B-6806x48

IN STOCK

15 available for immediate shipment

Safety Warning: Grab bars are no stronger than the anchors and walls to which they are attached and, therefore, must be firmly secured in order to support the loads for which they are intended.

ADA compliant stainless steel grab bar. 1-1/2" diameter. 48" Rated length. Smooth satin finish. Snap flanges cover concealed mounting plates. 1-1/2" handle clearance from wall.


  • Overall dimensions: 51-1/4" Long x 3-1/4" Tall x 3" Deep

  • Can support loads in excess of 900 lbs. when properly installed.



Measurement Diagram:


Type: Straight Grab Bar   
Primary Material: Stainless Steel   
Mount Type: Concealed (Snap Flange)   
Outside Diameter: 1-1/2"   
Rated Width: Not Applicable   
Rated Length: 48"   
Grip Type: Smooth   
Finish / Color: Satin   
Load Capacity: Up to 900 lbs.   
Bariatric: Yes   
Antimicrobial: No   
Overall Dimensions: 51-1/8" Wide x 3-1/8" Tall x 3" Deep   
Shipping Dimensions: 52" Length x 4" Width x 4" Height   
Shipping Weight: 4.7 lbs.   
UPC / GTIN: 716954003676   
Manufacturer Model No.: B-6806x48   
Country of Manufacture: USA   
Warranty: 1 Yr. Manufacturer's Limited   

Architectural Specifications:

   

Grab bar shall be type-304 stainless steel with satin-finish, slip-resistant surface. Grab bar shall have 18-gauge (1.2mm) wall thickness and 1-1/2" (38mm) outside diameter. Clearance between the grab bar and wall shall be 1-1/2" (38mm). Concealed mounting flanges shall be 11-gauge (3.2mm) thick stainless steel plate, 2" x 3-1/8" (50 x 80mm), and equipped with at least two screw holes for attachment to wall. Flange covers shall be 22 gauge (0.8mm), 3-1/4" (85mm) diameter x 1/2" (13mm) deep, and shall snap over mounting flange to conceal mounting screws and/or WingIt fasteners. Ends of grab bar shall pass through concealed mounting flanges and be heliarc welded to form one structural unit. Grab bar shall comply with accessible design (including ADAAG in the U.S.A.) for structural strength.






Ratings & Reviews

No reviews available

Be the first to Write a Review