• Home
  • Bobrick B-580616x36 Vinyl-Coated, Straight, 36" Grab Bar

Bobrick B-580616x36 Vinyl-Coated, Straight, 36" Grab Bar

(0) No Reviews yet
$97.90
SKU: B-580616x36

Ships in 3 business days from manufacturer.

Safety Warning: Grab bars are no stronger than the anchors and walls to which they are attached and, therefore, must be firmly secured in order to support the loads for which they are intended.

1-1/4″ (32mm) Diameter. Rated length of 36". Vinyl-coated grab bar for bath/shower/toilet compartment. Bars are corrosion-resistant, zinc-coated steel pipe with vinyl, antibacterial, biocompatible, and warm-to-the-touch coating.


  • Zinc-plated 1" (25mm) diameter steel tube with 1/8" (3mm) thick W1 white vinyl antibacterial, biocompatible, and warm-to-the-touch coating with glossy finish.

  • 1-1/4" (32mm) outside diameter tubing.

  • Clearance between the Grab Bar and wall is 1-1/2" (38mm).

  • Bobrick grab bars that provide 1-1/2" (38mm) clearance from wall B-580616 x 18, B-580616 x 24, B-580616 x 36, B-580616 x 42 can withstand loads of 450 pounds (204 kg) if properly installed.



Measurement Diagram:


Type: Straight Grab Bar   
Primary Material: Stainless Steel   
Mount Type: Concealed (Snap Flange)   
Outside Diameter: 1-1/4"   
Rated Width: Not Applicable   
Rated Length: 36"   
Grip Type: Smooth   
Finish / Color: Satin   
Load Capacity: Up to 600 lbs.   
Bariatric: Yes   
Antimicrobial: No   
Overall Dimensions: 39-3/16" Wide x 3-3/16" Tall x 2-3/4" Deep   
Shipping Dimensions: 40" Length x 4" Width x 4" Height   
Shipping Weight: 2.8 lbs.   
UPC / GTIN: 716954011985   
Manufacturer Model No.: B-580616x36   
Country of Manufacture: Italy   
Warranty: 1 Yr. Manufacturer's Limited   

Architectural Specifications:

   

Vinyl-Coated Grab Bar shall be corrosion resistant, zinc coated steel pipe with vinyl antibacterial, biocompatible, and warm-to-the-touch coating. Grab Bar shall have 1/8" (3mm) wall thickness, 1/8" (3mm) extruded plastic finish coating thickness, and 1-1/4" (32mm) outside diameter. Clearance between the grab bar and wall shall be 1-1/2" (38mm). Concealed Mounting Flanges shall be fiberglass reinforced nylon plate and equipped with four screw holes for attachment to wall. Flange covers shall be fiberglass reinforced nylon with glossy finish, 3-1/4" (83mm) diameter, and shall snap over Mounting Flanges to conceal mounting screws. Ends of grab bar shall pass through Concealed Mounting Flanges. Grab Bar shall comply with accessible design (including ADAAG in the U.S.A.) for structural strength






Ratings & Reviews

No reviews available

Be the first to Write a Review