Bobrick B-518 Padded, Naugahyde, Right-Hand Folding Shower Seat
Complies with Planning Guide for Accessible Restrooms. Foam-padded, white, water-resistant, Naugahyde seat is 1 - 1/2″ (38mm) thick, with enclosed 1/2″ (13mm) plywood base. Frame and mounting brackets are type-304 stainless steel and feature self-locking mechanism. Supports up to 360 lbs (163 kg) when properly installed. Seat 32 - 7/8″ (835mm) wide, projects 22 - 11/16″ (575mm) from wall. Left-hand seat.
SAFETY WARNING: Shower seats are no stronger than the anchors and walls to which they are attached and must be firmly secured in order to support the loads for which they are intended. Consult and comply with local building codes. To avoid potential injury, the building owner or maintenance personnel should remove the shower seat from service if the shower seat is not adequately secured to the wall. In the interests of safety and the protection of end users, this seat should not be used to support weights exceeding 360 lbs (163 kg). To avoid potential seat malfunction, DO NOT use seat if weight exceeds 360 lbs (163 kg). Failure to abide by this warning may result in seat malfunctioning, potentially causing minor to moderate injury.
Shower seat can be folded up against the wall when not in use.
Comfortable padded seat.
Type-304, 16-gauge (1.6mm), satin-finish stainless steel frame construction.
Complies with accessible design (including ADAAG in the U.S.A.) for structural strength.
Measurement Diagram:
| Installation Type: | Wall / Surface |
| Frame Material: | Stainless Steel |
| Seat Material: | Padded Naugahyde |
| Capacity: | 360 lbs |
| Operation: | Fold-Up |
| Overall Dimensions: | 32 - 7/8" Wide x 15 - 7/16" Tall x 21 - 1/4" Deep |
| Net Weight: | 21 lbs |
| Shipping Dimensions: | 33.5" Length x 27.5" Width x 5.3" Height |
| Shipping Weight: | 24.8 lbs. |
| Manufacturer Model No.: | B-518 |
| UPC / GTIN: | 716954002648 |
| Country of Manufacture: | United States |
| Warranty: | 1 Yr. Manufacturer's Limited |
Architectural Specifications:
Folding shower seat shall have a frame constructed of Type-304, satin-finish stainless steel that consists of 16-gauge (1.6mm),1-1/4'' (32mm) square tubing and 18-gauge (1.2mm), 1'' (25mm) diameter seamless tubing. Seat cushion shall be 2" (51mm)thick consisting of 1-1/2" (38mm) closed cell polyurethane foam padding mounted on 1/2" (13mm) thick plywood and covered in white Naugahyde (water-resistant reinforced vinyl fabric). Shower seat shall be equipped with two 3'' (76mm) diameter mounting flanges constructed of Type-304, 3/16'' (5mm) thick, satin-finish stainless steel; a guide bracket constructed ofType-304, 16-gauge (1.6mm), satin-finish stainless steel; and a spring constructed of Type-301, 24-gauge (0.6mm) stainless steel that is spot-welded to a baseplate of Type-304, heavy-gauge stainless steel. Shower seat shall be able to lock in upright position when not in use. Shower seat shall comply with accessible design (including ADAAG in the U.S.A.) for structural strength.