Bobrick (B-4998.99) Satin Stainless Steel, Peened Swing-Up Grab Bar
32 mm (1 - 1/4″) diameter tubing. Peened grip area. Satin-Finish, slip-resistant surface stainless steel grab bar for bath/shower/toilet compartment. Exposed mounting.
18-8, Type-304, 18-gauge (1.2mm) stainless steel tubing with satin finish. 1–1/4" (32mm) outside diameter. Ends are heliarc welded to fl anges.
Mounting fasteners are NOT included.
Measurement Diagram:
| Type: | Swing-Up Grab Bar |
| Primary Material: | Stainless Steel |
| Mount Type: | Exposed |
| Outside Diameter: | 1-1/4 inch |
| Rated Width: | Not applicable |
| Rated Length: | 29" |
| Grip Type: | Peened/Textured |
| Finish / Color: | Satin |
| Load Capacity: | 500 lbs. |
| Bariatric: | No |
| Anti-Microbial: | No |
| Overall Dimensions: | 29" Long x 8-3/4" Tall x 6-1/8" Wide |
| Net Weight: | 9.3 |
| Shipping Dimensions: | 9" Length x 36" Width x 6.8" Height |
| Shipping Weight: | 10.3 |
| UPC / GTIN: | 716954002587 |
| Manufacturer's Part No.: | B-4998.99 |
| Country of Manufacture: | US |
| Warranty: | 1 Yr. Manufacturer's |
Architectural Specifications:
Grab bar shall be Type-304 stainless steel with satin finish. Grab bar shall have 18-gauge (1.2mm) wall thickness and 1–1/4" (32mm) outside diameter. Backplate shall be 3/16" (5mm) thick stainless steel, equipped with screw holes for attachment to wall. Swing-up grab bar shall be manually raised for approach or departure and lowered to horizontal position for support; counterweighted design shall prevent grab bar from falling back down to the full horizontal position once grab bar is raised to the full upright (vertical) position.
Product Group Variations: