Bobrick B-4063 ConturaSeries® Recessed, Satin Stainless Steel, Push-Activated Soap Dispenser
Dispenses all-purpose soaps. Drawn, 1mm (20-gauge), one-piece front, satin-finish stainless steel with vessel attached to back. Capacity is 1.5 L (50 fl. oz). Pulls out for filling. Concealed locking device. Wall to push-button is 40 mm (1 - 5/8″).
18-8, type-304, heavy-gauge stainless steel. All-welded construction.
Corrosion-resistant valve dispenses commercially marketed all-purpose hand soaps.
Valve operates with one hand, without tight grasping, pinching, or twisting of the wrist, and with less than 5 pounds of force (22.2 N) to comply with barrier-free accessibility guidelines (including ADAAG in U.S.A.).
Large opening in container provides fast, easy filling. Faceplate/container assembly can be removed for cleaning.
Front of soap dispenser faceplate has same degree of arc and matches other Bobrick ConturaSeries accessories in the washroom.
Measurement Diagram:
| Installation Type: | Recessed |
| Operation: | Push-Activated |
| Soap / Sanitizer Type: | All-Purpose Soaps |
| Capacity: | 50 fl. oz. (1.5L) |
| Rough-In: | 5 - 7/8" Wide x 5 - 1/2" Tall x Minimum of 4" Deep |
| Overall Dimensions: | 7 - 1/4" Wide x 6 - 3/8" Tall x 5 - 1/2" Deep |
| Net Weight: | 2.3 lbs |
| Shipping Dimensions: | 7.5" Length x 6.8" Width x 6" Height |
| Shipping Weight: | 6.2 lbs. |
| Manufacturer Model No.: | B-4063 |
| UPC / GTIN: | 716954002303 |
| Country of Manufacture: | United States |
| Warranty: | 3 Yr. Manufacturer's Limited |
Architectural Specifications:
Recessed soap dispenser shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have satin finish. Corrosion resistant valve shall dispense commercially marketed all-purpose hand soaps. Valve shall be operable with one hand and with less than 5 pounds of force (22.2 N) to comply with accessible design guidelines (including ADAAG in U.S.A.). Front of soap dispenser faceplate shall have same degree of arc and match other Bobrick ConturaSeries accessories in the washroom. Radius on corners and edges of flange and faceplate shall complement other Bobrick ConturaSeries washroom accessories. Flange shall be drawn, one-piece, seamless construction. Soap dispenser faceplate shall be drawn, 20-gauge (1.0mm), one-piece, seamless construction; equipped with an soap refill-indicator window and concealed locking device opened with special key provided; and shall pull out for filling and cleaning the covered molded plastic soap container attached to back. Soap container shall have a capacity of 50-fl oz (1.5-L).