• Home
  • ASI (10-9467) Recessed Multi/C-Fold Paper Towel Dispenser & Waste Receptacle, 4.5 Gal (600C/800M)

ASI (10-9467) Recessed Multi/C-Fold Paper Towel Dispenser & Waste Receptacle, 4.5 Gal (600C/800M)

(0) No Reviews yet
SKU: 10-9467

This product will ship from the manufacturer in 2 days.

Dispenses 600 C-fold or 800 multi-fold paper towels. 4.5 gal. (17 L) stainless steel waste receptacle.

Paper towels are manually withdrawn through dispensing slot until towels are depleted.

Unit will continue to feed properly when reloaded with a partial load in place. Refill dispenser by unlocking door and replacing towels for an empty or partially empty unit. Locking full-face door over compartments prevents unauthorized access or removal.

Cover Material: 20 Gauge Type 304 Stainless Steel Alloy 18-8   
Mount: Wall / Recessed   
Capacity: 600 C-Fold | 800 Multifold   
Waste Bin Capacity: 4.5 Gallons   
Locks: Yes, two.   
Overall Dimensions: 13" Wide x 55" Tall x 5-3/16" Deep
(Projects 15/16" out from wall.)   
Rough-In: 11-1/2" Wide x 53-1/2" Tall x 4-1/4" Deep   
Net Weight: 44.5 lbs.   
Shipping Dimensions: 57" Length x 15" Width x 6" Height   
Shipping Weight: 47.5 lbs.   
Comments: For compliance with ICC/ANSI A-117.1-2003 and ADA Accessibility Guidelines install unit with centerline of towel dispenser slot 48" (1219) maximum above finished floor (MAX AFF) only if clear floor forward reach or side reach access is provided.   

Architectural Specifications:


Profile Collection Recessed Paper Towel Dispenser and Waste Receptacle shall hold and dispense 800 standard multi-fold or 600 standard C-fold paper towels and shall have a waste capacity of 4.5 gallons (17 liters). Cabinet and dispenser unit shall be fabricated of 20 gauge type 304 stainless steel alloy 18-8 with 1" (25.4) wide perimeter trim to lay flat against wall. All exposed surfaces shall have No 4 satin finish. Full-face door shall be 16 gauge and shall be free of miters, welding or open seams with 3/4" (19) radiused vertical edges and 15/16" (24) square horizontal returns to wall. Door shall be attached to the edge of unit with a concealed full length 3/16" diameter (Ø4.8) stainless steel multi-staked piano hinge and shall be held closed with two (2) flush rimless tumbler locks keyed alike to other ASI washroom equipment. Towel dispensing slot shall have a fully hemmed-in rolled edge for snag-free dispensing and user safety. Waste receptacle shall be fabricated of stainless steel with hemmed edges and shall have a welded on finger pull for ease of service removal and maintenance safety. Structural assembly of body and door components shall be of welded construction.

Ratings & Reviews

No reviews available

Be the first to Write a Review