ASI 10-7308 Stainless Steel Robe Hook with Peg, Stainless Steel, Satin Finish
Omara Collection Single Robe Hook of type 304 stainless steel alloy 18-8. Wall flange locks to wall bracket with stainless steel M5 hex socket set screw concealed on bottom perimeter of flange. Post are 22 gauge tubing with formed 18 gauge threaded bracket welded inside end. Hook are solid pin. Flange is 1/16" (1.5) thick with 3/32" (2.3) thick sides and heavy reinforcement ribs. Post are bolted to flange with concealed and locked M6 (Ø1/4") screw.
All exposed surfaces have satin finish. Wall bracket is 18 gauge with embossed ribs for added strength and has two (2) mounting slots to accommodate M4 pan head screws (provided) and allows for slight installation alignment adjustment. Hex L-key (M2.5) is provided to lock set screw to secure unit to wall bracket.
| Primary Material: | Stainless Steel |
| Finish: | Brushed |
| Mount: | Wall / Surface, Concealed |
| Capacity: | Not published |
| Overall Dimensions: | 1-15/16" Diameter x 2-5/16" Deep |
| Net Weight: | 0.3 lbs. |
| Shipping Dimensions: | 6" Length x 4" Width x 4" Height |
| Shipping Weight: | 1 lb. |
| Warranty: | Warranted to be free from initial defects in material and workmanship for a period of one (1) year from date of invoice. |
| UPC / GTIN: | Not published |
| Country of Manufacture: | Not published Buy American Act compliant |
| Comments: | Mounting hardware is included Hook is suitable for robes or clothing and small carry bags. |
Architectural Specifications:
Omara Collection Single Robe Hook shall be type 304 stainless steel alloy 18-8. Wall flange shall lock to wall bracket with stainless steel M5 hex socket set screw concealed on bottom perimeter of flange. Post shall be 22 gauge tubing with formed 18 gauge threaded bracket welded inside end. Hook shall be solid pin. Flange shall be 1/16" (1.5) thick with 3/32" (2.3) thick sides and heavy reinforcement ribs. Post shall be bolted to flange with concealed and locked M6 (Ø1/4") screw. All exposed surfaces shall have satin finish. Wall bracket shall be 18 gauge with embossed ribs for added strength and shall have two (2) mounting slots to accommodate M4 pan head screws (provided) and allow slight installation alignment adjustment. Hex L-key (M2.5) is provided to lock set screw to secure unit to wall bracket.