• Home
  • ASI (10-04523-6) Semi-Recessed, Roll Type Paper Towel Dispenser, Lever Operated

ASI (10-04523-6) Semi-Recessed, Roll Type Paper Towel Dispenser, Lever Operated

(0) No Reviews yet
$552.45
SKU: 10-04523-6

This product will ship from the manufacturer in 2 days.

Unit holds and dispenses one 8′′or 9′′ (203mm or 229mm) wide standard towel roll up to 800 ft. (244m) long and one stub roll up to 4′′ (102mm) diameter.

Unit allows settings for towel dispense length of 2-1/2′′, 4′′ or 5′′ (64mm, 102mm, or 127mm) with no adapter plates. Locking door prevents unauthorized access or removal.

Semi-Recessed with stainless steel collar.


Cover Material: 22 Gauge Type 304 Stainless Steel Alloy 18-8   
Mount: Wall / Surface   
Operation: Lever Operated   
Capacity: "One 8"" Dia., 8"" Wide Roll
One 4"" Dia., 8"" Wide Stub Roll"   
Locks: Yes, one tumbler   
Overall Dimensions: 17-1/4" Wide x 30-1/2" Tall x 11-1/2" Deep (including lever)   
Net Weight: 24.6 lbs.   
Shipping DImensions: 32" Length x 19" Width x 13" Height   
Shipping Weight: 26.6 lbs.   
Comments: Towels are fed by lever action until supply is depleted. Towel feed length is adjustable for economy by pin (supplied) limiting of lever stroke length. Unit may be reloaded with a full roll to automatically start when finished with an existing partial (stub) roll. Locking door.   

Architectural Specifications:

   

Semi-Recessed Roll Paper Towel Dispenser shall hold and dispense one 8′′or 9′′ (203mm or 229mm) wide standard towel roll up to 800 ft. (244m) long and one stub roll up to 4′′ (102mm) diameter. Unit shall be fabricated of alloy 18-8 stainless steel type 304, 22 gauge; door and rear panel of unit shall be 18 gauge. A dispensing mechanism shall be supplied. Door shall be attached to cabinet at side with a full length 3/16′′ (5mm) multi staked piano hinge and shall be held closed with tumbler lock keyed alike to other ASI washroom equipment. Face trim shall be 1′′ (25mm) wide formed from one piece with no miters, welding or open seams and shall have a 1/4′′ (6mm) square return to wall. Structural assembly of all components shall be of welded construction. All exposed surfaces shall have a No 4 satin finish and shall be protected with a PVC film easily removable after installation. Unit shall allow settings for towel dispense length of 2-1/2′′, 4′′ or 5′′ (64mm, 102mm, or 127mm) with no adapter plates. Unit shall be supplied with SR collar to convert to semi-recessed mounting.



Ratings & Reviews

No reviews available

Be the first to Write a Review