• Home
  • ASI (10-0195) ROVAL Surface Mount, Automatic Hand Dryer, White Cast Iron, Universal Voltage

ASI (10-0195) ROVAL Surface Mount, Automatic Hand Dryer, White Cast Iron, Universal Voltage

(0) No Reviews yet
SKU: 10-0195


6 available for immediate shipment

This heavy duty, vandal resistant, slim profile hand dryer is ADA compliant (when surface mounted) and has a sleek modern cover design.

  • Indestructable heavy duty cast iron cover

  • Quiet operation (63dB)

  • 10 Year manufacturer's limited warranty

  • ADA Compliant without need for recessing (surface mount)

  • Universal voltage support (works with 110-120V, 208V or 220-240V)


Measurement Diagram:

Reported Dry Time: 25 Seconds   
Mount: Wall / Surface   
Cover: One piece heavy-duty cast iron (1/4" thick)   
Nozzle: Fixed directional outlet grill   
Activation: Automatic (infra-red) hands-free (self calibrating)   
Power: 2200 Watts, 100-240V (9.6 to 19.1A), 50/60Hz   
Motor: Brush type, dual ball bearings   
Fan: Single Inlet Centrifugal   
Airspeed: 185 CFM   
Reported Sound Level: 63 dB   
Heating Element: 2020W Nichrome wire with auto reset circuit breaker   
Filter: None   
IP Rating: Not published   
Product Dimensions: 10-3/4" Tall x 14-1/2" Wide x 4" Deep   
Product Weight: 25 lbs.   
Shipping Dimensions: 16-3/4" Length x 12-3/4" Width x 8" Height   
Shipping Weight: 26.5 lbs.   
UPC / GTIN: Not published   
Manufacturer's Part No.: 10-0195   
Country of Manufacture: Taiwan   

Architectural Specifications:


Surface Mounted Sensor Hand Dryer With Cast Iron Cover shall operate automatically from IR sensor that shall activate dryer when hands are placed in sensor zone. Motor and heating element shall have internal resetting automatic thermal protection. Cover shall be fabricated of one-piece, heavy-duty cast iron 1/4" [6,4] thick, and shall have all exposed surfaces finished with acid, chip and scratch resistant porcelain enamel. Fixed directional air vanes shall be heavy duty, rust proof and tamper resistant. Air intake slots shall not allow access to internal parts. Back plate shall be furnished with vibration isolating mounting bushings. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self calibrate to provide uniform sensitivity over its entire life span. Entire unite shall be internally electrically grounded. Dryer unit shall have C-UL-US® approval and be listed under the re-examination services of Underwriters Laboratories, Inc. Unit shall be warranted against defects in materials or workmanship for ten (10) years.

Ratings & Reviews

No reviews available

Be the first to Write a Review