• Home
  • ASI 10-0135-1 TURBO-Tuff Fully Recessed High Speed Hand Dryer, 110-120V, 50/60Hz, Stainless Steel

ASI 10-0135-1 TURBO-Tuff Fully Recessed High Speed Hand Dryer, 110-120V, 50/60Hz, Stainless Steel

(0) No Reviews yet
SKU: 10-0135-1


8 available for immediate shipment

Heavy duty stainless steel face plate with satin finish. 5 year warranty. Automatic resetting thermal protection on motor and heating element. Flush security hex access screws and heavy duty slotted air intake vents prevent unauthorized tampering.

  • Fully recessed for ADA compliance
  • Hands-in design minimizes dripping
  • Heavy duty, stainless steel, vandal resistant construction
  • Self calibrating IR sensor for reliable automatic activation
  • 5 Year manufacturer's limited warranty



Measurement Diagram:


Need a higher speed dryer that is surface mount and GreenSpec listed? We recommend the ASI 0197 TURBO-dri high speed hand dryer.

Activation: Automatic (infra-red) hands-free (self calibrating)   
Mount: Wall Mount / Recessed Mount   
Cover: 18 gauge type 304 stainless steel   
Cycle Time: Not applicable Dryer stops when hands are removed.   
Nozzle: Concentrated dual port nozzle   
Power: 1000 Watts, 110-120V (8.7A), 50/60Hz   
Motor: Brush type, dual ball bearings   
Fan: Multi-Inlet Centrifugal   
Airspeed: 42-60 CFM, 150-230 ft/s   
Heating Element: 325-500 Watt with auto reset circuit breaker   
Filter: None   
IP Rating: Not published   
Product Dimensions: 12-19/32" Wide x 15-3/4" High x 4-1/16” Deep   
Shipping Dimensions: 17" Width x 15" Length x 5-3/4" Height   
Shipping Weight: 19 lbs.   
UPC / GTIN: Not Published   
Manufacturer Model No.: 10-0135-1   
Country of Manufacture: Taiwan   
Warranty: 5 Year Manufacturer Limited Warranty   
Additional Comments: Taiwan   

Architectural Specifications:

Turbo-Tuff™ Recess Mounted Sensor Hand Dryer shall operate automatically from IR sensor that shall activate dryer when hands are placed in sensor zone. Cover and hand drying chamber shall be 18 gauge type 304 stainless steel alloy 18-8. All exposed surfaces shall have satin finish and shall be protected during shipment by PVC film easily removable after installation. Cabinet shall be 20 gauge galvannealed steel with a 1/2" [13] wide perimeter trim to lay flush against wall and shall have concealed and captive hex screws to close cover. Motor and heating element shall have internal resetting automatic thermal protection. Fixed directional air shall be vanes heavy duty, rust proof and tamper resistant. Air intake slots shall not allow access to internal parts. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self-calibrate to provide uniform sensitivity over its entire life span. Entire unit shall be internally electrically grounded. Dryer unit shall have approval and be listed under the re-examination services of Underwriters Laboratories, Inc. Unit shall be warranted against defects in materials or workmanship for three (3) years. Owner’s Manual (OM) and Mounting Template Installation Guide (MT & IG) are supplied with unit.

Ratings & Reviews

No reviews available

Be the first to Write a Review